Tyco 611HF 60°C Fixed Heat Detector 516.600.214
The Tyco 611HF (516.600.214) is a 60°C Fixed Heat Detector that used two networked thermistors in a bridge configuration to provide a fast response.
The Tyco 611H-F 516.600.214 is a Conventional Heat Detector, with a fixed temperature at 60°C. When environmental conditions rule out the use of smoke detectors, the Tyco 611H-F offers an acceptable, but less sensitive alternative. The 611H-F detects abnormally high rates of rise of temperature and abnormally high (static) temperatures respectively.
In many environments, e.g. galleys, canteens, pantries and laundries, sudden large changes in temperature are considered normal therefore rate-of -rise detectors are generally not suitable. In these cases and a slower response fixed temperature 601H-F, 611H-F or 631H-F detector should be used.
Approved by all major classification societies for use on vessels
Reduced installation costs due to easier termination, polarity independent wiring and use of common base for all detector types
Lower cost of ownership as no radioactive source disposal costs together with less spares holding
Easier system design with full range of detector types including intrinsically safe models
Higher safety in accommodation areas by using the unique Carbon Monoxide (CO)
IP55 rated 60oC Fixed temperature heat detector
-20°C to +70°C
T1000 / T1200 Conventional